Progress

Progress

003

We are hard at work producing the parts to make the VX 20 vise. I thought I would share some of the processes that go into making the vise.The picture above shows some parts  right after machining.  After machining there are a lot of burrs and tool marks in the parts. To get rid of all of the marks and soften all of the corners the parts are put into a vibratory tumbler with little cone shaped dense plastic media. After many hours of tumbling the parts come out with a very uniform finish and all the edges are smooth. After the finishing process the parts are sent out to be anodized and then they are ready for assembly.

Share this post

Leave a Reply